Movement sensors to put your projects in action!©

TILT SENSORS

This sensors operate when tilted the horizontal position. The switch movement required to cause contact change ( example off to on ) is called the differential angle.
it is very important when designing a tilt switch  to allow for the differential angle and understand that when in the horizontal position the switch contact may be open or closed.
The life expectancy of our Tilt switches is typically 1000000 operations at normal load. Switching higher, inductive or capacitive loads will considerably reduce life, while switching on minimal loads will significantly increase life expectancy.
Unless specified switches can be used on AC and DC loads. For DC voltages reduce AC rating by 70%.

Differential angle is specified with pins on horizontal line.
These switches contain toxic material.

MiniSuperPLC Starter KIT ! $988 inputs, 4 outputs, HMI Interface, cable & software

 

SCM International home

Sensors

SCMStore.com, license and Conditions of use

SCM International, Inc. license the user to use this application by the term of a session, only under the following terms and conditions:

All site materials, without limitation, text, graphics and other files ("Materials") thereof are copyrighted materials of SCMStore.com. The use of this license for extraction of product codes and descriptions to be presented or transferred to another entity, commercial or not, is prohibited. Potential customers may use it exclusively as a tool for reviewing products and services offered by SCMStore.com, without obligation to buy. The use of any Material found on SCMStore.com for reverse engineering, competence, analyze and/or copying commercial processes is strictly prohibited. The user of this license joins SCM International and their customers in the spirit of creating a mutual collaboration based in confidence with the procedures SCM International places at the disposal of their customers.