|
|
|
|
Low cost. Metallic and Mercury free. |
|
Cylindrical,
Mercury Free |
LTC20400

Contact |
NO
- Dependant on position |
|
Voltage |
24
Volts Max. |
Current |
25 mA |
Differential angle |
10° |
Contact resistance |
50 to 100 ohm. |
Operating temp. (°c) |
-25 to 70 |
Storage temp. (°c) |
-40 to 85 |
Case |
Copper Alloy, Silver or Gold
plated over Nickel |
LTC20500

Contact |
NO
- Dependant on position |
|
Voltage |
24
Volts Max. |
Current |
25 mA |
Differential angle |
15° |
Contact resistance |
50 to 100 ohm. |
Operating temp. (°c) |
-25 to 70 |
Storage temp. (°c) |
-40 to 85 |
Case |
Copper Alloy,
Silver or Gold plated over Nickel |
LTC20700

Contact |
NO
- Dependant on position |
|
Voltage |
24
Volts Max. |
Current |
25 mA |
Differential angle |
15° |
Contact resistance |
50 to 100 ohm. |
Operating temp. (°c) |
-25 to 70 |
Storage temp. (°c) |
-40 to 85 |
Case |
Copper Alloy,
Silver or Gold plated over Nickel |
LTC20800

Contact |
NO
- Dependant on position |
|
Voltage |
24
Volts Max. |
Current |
25 mA |
Differential angle |
15° |
Contact resistance |
50 to 100 ohm. |
Operating temp. (°c) |
-25 to 70 |
Storage temp. (°c) |
-40 to 85 |
Case |
Copper Alloy,
Silver or Gold plated over Nickel |
LTC20900

Contact |
NO
- Dependant on position |
|
Voltage |
24
Volts Max. |
Current |
25 mA |
Differential angle |
10° |
Contact resistance |
50 to 100 ohm. |
Operating temp. (°c) |
-25 to 70 |
Storage temp. (°c) |
-40 to 85 |
Case |
Copper Alloy,
Silver or Gold plated over Nickel |
|
|
|
|
|
Please
read carefully the terms and conditions concerning the use of application
notes, materials, and information on this site.
Copyright © 2001-07. SCM International. All rights reserved.Todos los derechos reservados.
SCM International, Inc.
Mailing Address:
SCM International, Inc.
2648 E. Workman Ave. suite 527
West Covina, CA 91791
USA
Fax: +1 (530)3256895
Corporate Headquarters POBOX:
SCM International, Inc.
POBOX 9793
Reno, NV . 89507
USA
SCMStore.com, license and Conditions of use |
SCM International, Inc.
license the user to use this application by the term of a session, only under the
following terms and conditions:
|
(c)
2008, SCM International, Inc. All right reserved.
|