Universal Programmer, SCMMPUNIV
 

FEATURES

  • Flexible and easy to use menu-driven software.

  • Auto search device select function supports E(E)PROMs & Microcontrollers.

  • Device insertion test identifies improperly inserted device before programming.

  • Check for incorrect device insertion, backward, incorrect position, and poor pin contact.

  • High-speed device function tests and user creatable test library.

  • Device Operations: Read, Blank check, Program, Verify, Checksum, Data compare, Security, Auto(blank check-program-verify).

  • Support real 5, 3.3, and 2.7 volt for programming power.

  • Display programming parameters on the screen.

  • Set device/buffer address ranges before programming devices.

  • Extensive on-line F1 help system provides text and graphics.

  • Auto Programming for production programming.

  • User-changeable programming parameters.

  • Built-in editor for both buffer date and test vectors.

  • MACRO commands supports batch mode operation.

  • Support POF and JEDEC, Intel Hex, Motorola S Records, Tekhex, and binary file formats with Load, Edit, and Save commands.

  • Distribution of 16- and 32- bit data into 8-bit portions.

  • Any standard parallel printer-port interface.

  • Two on-board FPGAs for extremely fast communication.

  • Supports real 5, 3.3, and 2.7 volt for programming power.

  • Detects all pin locations for poor or damaged pin contacts.

  • Internal universal power supply,110-240 VAC (no separate power supply required in foreign country).

  • Current limiting protects hardware circuit from improperly inserted or defective chips and operation errors.

  • ADP-EE Universal programmer adapter: 48-Dip, 44-PLCC, 44-QFP and 32-PLCC as standard

  • True universal pin driver hardware.

  • Hardware diagnostic program exams all 48-pin drivers before using programmer.

SCMMPUNIV  is a software expandable universal device programming workstation that supports a wide variety of programmable devices in addition to the capability of testing digital ICs. The MP-UNIV is the most sophisticated low-cost programmer available today. A unique hardware/software architecture enables MP-UNIV to easily grow in support and engineering software design capabilities as quickly as your device library requirement. The state-of-art universal programmer offers you the most advanced programming facilities with the userfriendliest interface. Since each pin is software addressable, new part numbers are being added to the list of supported devices through software upgrades. No new hardware to buy! It will prove to be one of the most reliable and long lasting instruments. There is also an optional ROM emulator module that supports devices up to 4-Mbit.

SCMMPUNIV features a 48-pin universal pin driver and an expandable TTL pin driver. This special technology allows you to control the programmer’s pin switches, so each pin can supply Vcc, Vpp, or GND. Pins can also be configured for TTL high/low levels with pullhigh/pull-low, high-speed clock and tri-state. This advanced pin design lets you program any DIP devices up to 48 pins without an adapter. It also ensures the support full rang of today and future devices on the market. The standard system includes support for the following packages with ADP-EE adapter supplied with the programmer: Dip up to 48-pin, 44-PLCC, 44-QFP and 32-PLCC.

Universal programmer adapter. It connects 48 Dip to different sockets. The list of sockets on the adapter is:

· DIP-48 from DIP-48 (generic Dip adapter for 0.3" and 0.6" devices)

· PLCC-32 from DIP-28 (for 2764-27512 and Flash Memories)

· PLCC-44 from DIP-40 (for 8051 µC)

· QFP-44 from DIP-40 (for 8051 µC)

· PLCC-32 from DIP-32 (for 27010-27080 and Flash Memories)

 

Size: 4.5"x3.5" (12cm x 9cm)

Device programmed  ( Complete list? )

· EPROM

27xxx and 27Cxxx series, from 16 Kbit to 32Mbit with 8-bit/16-bit data width

· EEPROM

27Exxx, 28xxx , and 28Cxxx series

· Flash EPROM

256 Kbit to 32 Mbit 28Fxxx, 29Fxxx

29Cxxx, 29BVxxx, 29LVxxx, 29Wxxx

49Fxxx series(2.7, 3.3, 5.0, or 12 Volt)

· Serial E(E)PROMs

24Cxx, 24Fxx, 25Cxx, 59Cxx, EPC1/1213/1648, and 93Cxx

· Bipolar PROM

27Sxx, 7Cxxx, 71xx, 74Sxx, 87Sxx, 82Sxx,

· PALs, PALCEs, GALs

16V8, 20V8, 22V10, 20RA10, 26V12 series

· Dallas NV RAMs

DS12xx, DS13xx, DS15xx, DS16xx series

· PEELs

153, 173, 253, 273, 18CV8, 20CG10 series

· EPLDs

PLCxxx, PLSxxx, PLUSxxx, Epxxx, EPCxxx, EPMxxx, PLDxxx, 5Cxxx, 85Cxxx series

· SPLDs, CPLDs

ATF16/20/22Vxx, ATV750/1500/2500

· MACH series

MACH1xx/2xx/4xx, and xxx-SP series

· MAX series

MAX5000, MAX7000 series

· 8748 Microcontrollers

8741, 8742, 8748, 8749 series

· 8751 Microcontrollers

87C51/52, -FA, -FB, -FC, 528, 652, 654, 54

89Cxx, 89Sxx, 89LVxx, 89Cxxxx series

87C751/752

· SGS-Thomson Microcontrollers

ST62xx series

· Xilinx EPLDs

XC72xx, XC73xx series

· WSI’s PSDs

PSD3xx, PSD4xx, PSD5xx series

· MCHP’s PICs

PIC12Cxxx, PIC16xxx, 17xxx series

· Motorola Microcontrollers

MC68705, MC68HC705, MC68HC711 series

· Zilog Microcontrollers

Z86Cxx, Z86Exx series

I.C.s Tested

· TTL type

54, 74(S, LS, L, H, HC) series

· CMOS type

40, 45 series

· Dynamic Memory

4164 - 1MBit

· Static Memory

6116 - 6256

· User definable test pattern generation

Code: SCMMPUNIV price: $1590

 
   

SCM home page

Micros

Please read carefully the terms  and conditions concerning the use of application notes, materials, and information on this site.
 Copyright © 2007  SCM International

SCM International, Inc.

  English assistance by e-mail
  Asistencia en español por e-mail

Mailing Address:
SCM International, Inc.
2648 E. Workman Ave. suite 527
West Covina, CA 91791 
USA

Fax: +1 (530)3256895

Corporate Headquarters POBOX:
SCM International, Inc.
POBOX 9793
Reno, NV . 89507
USA

SCMStore.com, license and Conditions of use

SCM International, Inc. license the user to use this application by the term of a session, only under the following terms and conditions:

(c) 2008, SCM International, Inc. All right reserved.