MiniPLC. RPR Programming Functions

MiniPLC Function Blocks
Phone Connectable - Real Time Clock - Voice Warning - Networking

RPR

Symbol

Pin

Description

TRG

Timer for ON time delay is started via Input TRG (Trigger).

R

Timer for ON time delay is reset to ON via Input R, and make Output Q is 0 (The priority of R is higher than that of TRG).

T

After TRG is triggered and the time T elapses, the output is ON.

Q

After time delay T elapses, the output is ON.

Time sequence frame:

wpe32.jpg (7414 bytes)

Note

- If the status of Input TRG changes from 0 to 1, the internal timer will be activated. Whentime T is up, Output Q becomes 1 and then the input TRG coming again has no effect on output Q .Only when Input R becomes 1 again Output Q and Timer T will be reset to 0.

- This function is applicable to the locations where the time-delay ON and hold ON status are required.

- The assignment range for T is 0.01 - 99.99, and the time units can be set respectively to hour (H), minute (M) and second (S). Its time accuracy can reach 0.5 /00 Second.

MiniPLC Menu

PLC Function Blocks

SCM International, Inc.

English assistance by e-mail

Asistencia en español por e-mail

Mailing Address:
SCM International, Inc.
2648 E. Workman Ave. suite 527
West Covina, CA 91791
USA

Fax: +1 (530)3256895

Corporate Headquarters POBOX:
SCM International, Inc.
POBOX 9793
Reno, NV . 89507
USA

SCMStore.com, license and Conditions of use

SCM International, Inc. license the user to use this application by the term of a session, only under the following terms and conditions:

All site materials, without limitation, text, graphics and other files ("Materials") thereof are copyrighted materials of SCMStore.com. The use of this license for extraction of product codes and descriptions to be presented or transferred to another entity, commercial or not, is prohibited. Potential customers may use it exclusively as a tool for reviewing products and services offered by SCMStore.com, without obligation to buy. The use of any Material found on SCMStore.com for reverse engineering, competence, analyze and/or copying commercial processes is strictly prohibited. The user of this license joins SCM International and their customers in the spirit of creating a mutual collaboration based in confidence with the procedures SCM International places at the disposal of their customers.