• Development Board for Micro server MSW1, The One Square Inch Web Server Coprocessor

• DB9 Connector interfaces Micro server to PC for Learning, or Device Processor

• Single Micro server Module Included · Jumper Selectable for Direct Connection to Device UART or Inverted for PC

• Web Pages Created Using Standard HTML Authoring Tools (not included)

• Real World, Sample Applications with Source Code to Experiment with Micro server

• Downloads Web Pages and Firmware Upgrades to Micro server over Ethernet

• ActiveX OCX included for reconfiguring Micro server in your PC programs

• On-board electronics for using Micro server’s I/O capabilities. Includes LEDs, Switches, DAC filter and Thermistor.

• Serial Cable and Wall Transformer Included. "Surfable" Right Out of the Box

• RJ45 with Integrated Magnetics for connection to 10baseT hub or 10/100 switch

• Documentation, Example Source Code, Demos and Micro server Tools Available on Web Site or Optional CD-ROM

Description

The Micro server MSW1K Developer Kit is everything you need to get started with the Micro server MSW1 Web Server Coprocessor. The Micro server MSW1 is the first product in a family of embedded web servers designed to enable any microprocessor-based device to become web enabled easily and inexpensively. In approximately one square inch, the Micro server MSW1 includes a web server, 10baseT Ethernet controller, flash web page memory, graphical object processor, and a serial device interface.

The Development kit includes a Micro server MSW1 module, power supply, serial connector, software and examples to get you up to speed quickly. Simply plugging the RJ45 Kit into an Ethernet Hub or directly with a crossover cable, and the serial cable to a PC’s COMM port, allows you to simulate device activity and view it on the web immediately. Once demos and training is over, the MSW1K doubles as an interface to a device processor. Using the on-board DB9 or headers, a device processor can be connected to the MSW1K to communicate with the Micro server module. Jumper selectable inversion of the serial port allows communications directly with a device’s UART or an RS232 device (locally 0-5V levels).

The development kit includes  a software tool which allows you to download a web site into Micro server, and also make firmware upgrades as they become available. The aplication also creates data objects for communications between the device processor and Micro server. Additional tools allow for viewing  internal data from a remote Micro server so you can watch objects under real conditions.

The development kit also includes Micro server PC, a simulator for the Micro server MSW1 module. Micro server PC runs on your Windows PC and transforming it into a Micro server web server. Complete with simulation of serial port commands. You can connect your device processor to Micro serverPC and perform all functions as if it were a Micro server module. Perfect for classroom or multi-person development eviroments. Graphics designers can use Micro server PC to fully test graphics before downloading into a Micro server module. Software and hardware developers can test new applications quickly.